Lady Skater Two Ways : A Kitschy Coo Lady Skater Dress Pattern Review

19241652241_a162db60d6_k_Fotor_Collage

IPM 2015 is drawing to a close, what a ride it’s been! I’ve thoroughly enjoyed the constant stream of indie pattern inspiration from The Monthly Stitch this past few weeks and will definitely miss it when it’s over!

My last entry for Indie Pattern Month 2015 is the lady skater pattern done two ways – one as a boatneck peplum top and the other as a drapey lady skater dress. I’ve been eyeing this pattern from Kitschy Coo for over 6 months now, and IPM gave me the push I needed to finally make it up! It’s such a customisable design and so similar to some of my favourite RTW dresses, I knew that I could definitely stand to benefit from making a ton of these (plus it’s an easy and quick make too!)

https://flic.kr/p/vgFw93

20150628-IMG_9279

20150628-IMG_9296

The peplum top was very much intended to be a wearable muslin. I raised the neckline by 15cm and narrowed the shoulders to 4 cm based on the recommendations in this post, but clearly I’m of a different shape from the original writer because the neckline was much much too high on me! (It may have something to do with my lack of boobage…) I ended up cutting off the finished collar altogether and rebinding it with a neckline binding that was half the width of the original pattern piece. It’s wearable as it is right now, but I think I will go back and cut the neckline a little lower again – it does feel a bit like I’m getting strangled sometimes… I will also definitely rebind the neckline again, there’s a little bit of puckering going on there, though not enough to stop me wearing it out!

20150628-IMG_9234

20150628-IMG_9242

20150628-IMG_9243

I’ve always had a problem with peplums on my pear shape. I feel that they only serve to accentuate my big hips as they flare right at the largest point of my lower body! This version, however, I can definitely get behind. For some reason, I feel that this top actually does work for me. It may be a combination of the shortened waist (by 2″) and the reduced flare in the half circle skirt (I used the skirt pattern as is, just shortening it to a length of 9″), but no matter the reason I’m quite loving it! I’ve worn it out (in public, imagine that!) twice already, once with shorts to a dinner date and another time to work with jeans and heels on casual Friday. I can definitely envisage myself wearing this a whole lot more once I fix the neckline issues.

20150628-IMG_9251

TLDR;

Pattern: Kitschy Coo’s Lady Skater Dress (Cap sleeve version)

Size made: Size 2 at bust grading out to size 4 at waist

Fabric used: Black ITY jersey from Spotlight

Alterations made:

– Shortened bodice length by 2″

– Raised neckline

– Narrowed shoulders to 4″

– Shortened skirt to 9″ to make a peplum top

https://flic.kr/p/vis4Fd

20150628-IMG_9132

20150628-IMG_9123

To me, this lovely drapey dress was the main attraction. It was my first time working with rayon jersey, and I did face a lot of difficulty during the sewing process because of how light and slightly slippery it was!

The advantage of using such a light fabric was that I didn’t need to insert clear elastic into the waist seam in order to the support the skirt. I did attempt to at first, but as I didn’t have clear elastic (or at least not the flat kind) and regular braided elastic caused the fabric to warp at the waistline, I just decided to leave it out altogether.

20150628-IMG_9086

20150628-IMG_9106

20150628-IMG_9107

20150628-IMG_9116

This dress is wonderfully swishy and just the right length for me after shortening the bodice by 2″. The neckline on this version is raised as well, but only by 2″, and the shoulders have been left the same width as the pattern piece. The sleeves have also been lengthened by about 1.5″ to make a short sleeve rather than cap sleeve. On hindsight, I should have left the sleeve a little shorter as the print of this dress tends to be a little overwhelming in large doses, but I’m glad I tested out this sleeve length for future reference. Plus it’s a dream to wear, and a perfect length for church and for work #winning

TLDR;

Pattern: Kitschy Coo’s Lady Skater Dress (Cap sleeve version lengthened)

Size made: Size 2 at bust grading out to size 4 at waist

Fabric: Rayon Jersey from Sew Many Knits

Alterations made:

– Shortened bodice length by 2″

– Raised scoop neckline by 2″

– Lengthened sleeves by 1.5″

20150628-IMG_9074

20150628-IMG_9127

All in all, I really like what I’ve ended up with! A peplum top that I actually think I look good in (though I will probably love it loads more once I nail down that elusive boatneck neckline) and a wonderfully draped skater dress perfect for summer and big-eating days!

I have a lovely length of Katarina Roccella for Art Gallery knit and I’m wondering whether to make that up as a Lady Skater dress (with a round neck / boat neck)  or as a Christine Haynes Marianne dress. I would love to hear what you guys think!

huenma5_wp

6 thoughts on “Lady Skater Two Ways : A Kitschy Coo Lady Skater Dress Pattern Review

    1. Thank you!! (: I didn’t think I liked peplums either, but somehow this one is alright by me? I think it may have something to do about the length – most peplums flare before / right at the point where my hips are the widest, but this is a little longer so it ends slightly lower than usual!

  1. Both look great on you, but I especially love the peplum top! I think the neckline is perfect the way it is (it looks so classy), so I hope you decide to keep it. 🙂

Leave a Reply to springystitches Cancel reply

Your email address will not be published. Required fields are marked *

Back to top